HP Aruba 6400 Series Installation And Getting Started Manual page 62

Figure 24: Rack ears in mounting position 1 on the Aruba 6405 Switch
Figure 25: Rack ears in mounting position 1 on the Aruba 6410 Switch
Installing rear support hardware on the chassis and four-post rack
Prerequisites
• Rack rails installed. (See Installing rack rails).
• Rail spacers and front rack earls installed. (See Installing rail spacers and front rack ears for the four-
post rack mounting.)
62
NOTE: Mount the rack ears above the rail spacers you installed in step 1.
Aruba 6400 Switch Series Installation and Getting Started
Guide