Table of Contents
Advertisement
4. Board Operation
4.1. Booting Check
4.1.1.
Booting Check for Windows
Execute the Hyper Terminal of Windows and configure the port as below.
Configure the port as above.
In order to check the operation of the board, turn on the power after connecting the serial cable and
executing Hyper Terminal program.
Below booting message means normal operation of the board. Below screen means that the booting is
processed to Bootloader and Linux Kernel, and user can use the Linux.
If below booting message is not displayed, check if power adaptor or serial cable is normally
connected.
Figure 4-1 : Hyper Terminal Port Configuration
© Copyright 2008 WIZnet Co., Inc. All rights reserved.
16
Advertisement
Table of Contents
