Wiznet W5300E01-ARM User Manual page 39

5.4.1.2. Serial File Transmission at the Hyper Terminal
If PC is operating on Windows, the Hyper Terminal can be used as below.
The serial file transmission can be processed at the Hyper Terminal.
1. Execute Hyper Terminal, and log in with 'root' after W5300E01-ARM is booted.
2. Select 'Transfer' -> 'Send File...' at the menu bar.
3. When 'Send File' dialogue window appears, select 'Zmodem with Crash Recovery' or 'Zmodem' for
Protocol.
4. Click 'Browse...' button for seleting file to be transmitted.
5. If transmission is completed, check if the file is correctly transmitted with 'ls' command.
Figure 5-6 : Selecting Zmodem at the Hyper Terminal
© Copyright 2008 WIZnet Co., Inc. All rights reserved.
31