Wiznet W5300E01-ARM User Manual page 40

5.4.2. File Transmission by using NFS
In order to use NFS, NFS Server should be installed in the Host PC. For the detail of NFS server installation,
refer to '5.3.2 NFS Server Configuration'.
W5300E01-ARM supports NFS Client. In order to use the directory of NFS at the Host PC, input below
command at the target board.
# mount –t nfs –o nolock 192.168.1.2:/nfs /mnt/nfs
# ls /mnt/nfs
In the '/root' directory, the script to mount NFS is included. By using this script, NFS directory can be simply
mounted.
#./nfsmnt 192.168.1.2:/nfs
# ls /mnt/nfs
5.4.3. Others
In the W5300E01-ARM, FTP server and client are built in. By using FTP, file transmission is available.
© Copyright 2008 WIZnet Co., Inc. All rights reserved.
32