Demonstration & Test; Serial To Wi-Fi Test 1 (Ap Mode); Environment For Serial To Wi-Fi Test - Wiznet WizFi630 Quick Start Manual

2. Demonstration & Test
This section will show examples of how to test WizFi630.
The operation modes will be AP mode and Client (Station) mode when testing WizFi630.

2.1. Serial to Wi-Fi Test 1 (AP Mode)

2.1.1.

Environment for Serial to Wi-Fi Test

This section will explain on how to set Wizfi630 in AP mode and test Serial to Ethernet.
Connect WizFi630 and <PC1> with RS-232 and LAN cable as shown below; set the operation mode as
AP mode, and start the TCP server.
Connect <PC2> with WizFi630 and communicate using TCP client program.
The communicated data can be checked from <PC1> serial terminal.
6
(WIZnet Co., Ltd.)
WizFi630 Quick Start Guide