Table of Contents
Advertisement
5.
Input 'nand erase 40000 3c0000' to remove NAND Flash kernel area.
6.
Input 'nand write 31000000 40000 2eb958' to write the kernel image of RAM into the NAND Flash kernel
area. In here, '2eb958' is size of kernel image downloaded from tftp.
7.
By inputting 'printenv', check bootcmd.
8.
When kernel image size is changed, re-configure environment variable 'bootcmd'
Ex > If changed kernel image size is 300000.
WIZnet # setenv bootcmd 'nand read 30400000 400000 c00000;nand read 32000000 40000
300000;bootm 32000000'
9.
Input 'reset' or check Linux kernel booting by pushing reset button.
Figure 6-2 : Linux Kernel Booting
© Copyright 2008 WIZnet Co., Inc. All rights reserved.
35
Advertisement
Table of Contents
