This chapter describes the test setups used and the tests performed in evalu-
ating the EVM.
Setup: The bq24013 EVM board requires a single-cell Li-Ion or Li-Pol battery
pack and a 5-VDC, 1-A power source to provide input power. The test setup
connections and jumper setting selections are configured for a stand-alone
evaluation but can be changed to interface with external hardware, such as a
microcontroller.
Topic
2.1
I/O and Jumper Connections
2.2
Test Procedure
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2
Test Summary
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Test Summary
Page
2-2
2-2
2-1