Bill Of Materials; Reference - Texas Instruments bq24013 User Manual

3.3 Bill of Materials

Table 3–1 lists materials required for the EVM.
Table 3–1. Bill of Materials
Ref
bq24013
Item# Des
1 0 C1 Capacitor, ceramic, X5R, 1 F, 10 V
2 1 C2 Capacitor, ceramic, X5R, 1 F, 10 V
3 1 C3 Capacitor, ceramic, X7R, 0.47 F, 16 V
4 1 D1 Diode, LED, red, 1.8 V, 20 mA, 20 mcd
5 1 D2 Diode, LED, green, 2.1 V, 20 mA, 6 mcd
6 1 J1 Terminal block, 2 pin, 6 A, 3,5 mm
7 2 J2, J3 Terminal block, 4 pin, 6 A, 3,5 mm
8 2 J4, J5 Header, 3 pin, 100 mil spacing, (36-pin
strip)
9 2 R1, R2 Resistor, chip, 1.5 k , 1/16 W, 1%
10 0 R3 Resistor, chip, 1 M , 1/16 W, 1%
11 2 R5, R6 Resistor, chip, 10 k , 1/16 W, 1%
12 1 R4 Resistor, chip, 1.3 k , 1/16 W, 1%
13 1 U1 IC, single Li-Ion/Li-Polymer, charge
manager
14 2 — Shunt, 100-mil, black
15 1 — PCB, bq24010/2, 1.6 in
Notes: 1) These assemblies are ESD sensitive; ESD precautions must be observed.
2) These assemblies must be clean and free from flux and all contaminants. Use of no-clean flux is not acceptable.
3) These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4) Reference designators marked with an asterisk (**) cannot be replaced by substitutes. All other components can
be replaced with equivalent manufacturer components.

3.4 Reference

1) bq2401x data sheet (SLUS530)
Description
0.27 0.25
0.55 0.25
0.100
1.3 in 0.031 in
Schematic, Physical Layouts, and Bill of Materials
Bill of Materials
Size MFR Part Number
805 Panasonic ECJ-2YB1A105K
805 Panasonic ECJ-2YB1A105K
805 Panasonic ECJ-2YB1C474K
603 Lite-On 160-1181-1-ND
603 Lite-On 160-1183-1-ND
OST ED1514
OST ED1516
3 Sullins PTC36SAAN
603 Std Std
602 Std Std
603 Std Std
603 Std Std
MLP10 TI bq24013DRC
0.100 3M 929950-00
Any SLUP185
3-5