Safety Instructions; Product Installation - Event Lighting PAR12X12L User Manual

Safety Instructions

Warning
•
Do not open this device, there are no user serviceable parts inside. Risk of electric
shock.
•
Do not look directly at the light source from close range.
•
Avoid contact with the unit during operation, as the housing may become hot. Allow the
fixture to cool for at least 15 minutes after turning off before touching.
•
Install this device in a location with adequate ventilation, at least 50cm from adjacent
surfaces.
•
Do not operate this device, or connect this device to power, within 50cm of any
flammable material.
•
Use a safety chain when mounting this device overhead.
•
Do not operate this device outdoors where excessive dust, heat, water, or humidity may
affect it.
•
Do not operate this device if the housing, lenses, or cables appear damaged.
•
Do not connect this device to a dimmer or rheostat.
•
Do not operate this device at temperatures higher than 40°C (104°F).
•
Only connect this device to a grounded and protected circuit.
•
Only use the hanging bracket to carry this device.
•
Stop using this device immediately if a serious operating problem becomes apparent.

Product Installation

PAR12X12L can be mounted in many orientations, provided each individual device is secured by
the use of the correct mounting bracket. Use a safety chain when mounting PAR12X12L
overhead.
www.event-lighting.com.au
1
Version 1.0