Pepperl+Fuchs VAA-4E4A-G20-ZEJ/M2L-P7-GEB Manual page 8

VAA-4E4A-G20-ZEJ/M2L-P7-GEB
Product Description
PWR LED, Green
Flashing
Off
The AUX LED shows the status of the AUX external auxiliary voltage supply.
Display of the AUX External Auxiliary Voltage Supply
AUX LED
Red/green
Green on
Red on
Off
Status Indications for Motor Fuses
The FUSE1 LED for motor 1 and the FUSE2 LED for motor 2 show the status of the power
supplied to the motors.
Motor Fuse Indicator
LED FUSE1
LED FUSE2
Green
On
Off
Note!
Motor Fuses Are Safety Fuses
Fuses with a 5 A rated current act as protection against short circuits. Each motor is
safeguarded with a fuse. The fuses are not interchangeable. If a fuse is faulty, the module must
be replaced.
Status Indications for Motors MOT1, MOT2
The MOT1, MOT2, and DIR LEDs display information about the operating states of the
respective motor.
Motor Activity Indicators
LED MOT1
LED MOT2
Yellow
On
Off
8
FAULT LED, Red Status
Flashing Peripheral fault, collective error message for:
AUX external auxiliary power is missing or is
inverted
Overload of the sensor supply (IN+, IN-)
Overload of the speed signal SPEED
Off AS-Interface voltage missing
Status
AUX external auxiliary voltage is OK
AUX external auxiliary voltage is inverted
AUX external auxiliary voltage is missing
Status
Power supply for motor is OK
Power supply for motor is missing:
Fuse is faulty or
AUX external auxiliary voltage is not connected
Status
Motor is in operation
Motor is off