Christie RPMX-D120U Setup Manual page 13

RPMX-RPMSP-D120U & RPMSP-D275U Setup Guide
020-100038-02 Rev. 1 (09/08)
6. Secure the bracket to the adjuster base with the same 6, M4 screws used to
secure the light engine.
Figure 2.4. Install configuration bracket to adjuster base
7. Carefully, place the light engine in the lens-horizontal position on the
configuration bracket and adjuster base. Align the mounting holes between
the configuration bracket and light engine and secure using the 6 additional
M6 screws provided with the projector.
Figure 2.5. Re-position light engine
Section 2: Installation & Setup
2-5