Chapter 4 Installation And Application; Before The Installation - Raisecom ISCOM2109F Hardware Installation User Manual

www.raisecom.com

4.1 Before the installation

Before the installation, please be sure that whether there's any sub card need to be installed.
1) Type of sub cards that can be provided
Sub Card Model
SC200-GE-T
SC200-GE-X
Sub card: SC200-GE-T
Sub card SC200-GE-T provides 1 1000M electrical interface. The number for the electrical interface
is 9. The interface is in support of AUTO MDI/MDIX (when the auto negotiation function is enabled)
and 10/100/1000M self-adaptation.
The panel of SC200-GE-T is shown in the figure below:
① 1 10/100/1000M Ethernet electrical interface
② The status indicators for the Ethernet electrical interface
Indicator
LNK/ACT
10M

Chapter 4 Installation and Application

Sub Card Function
1000M/100M/10M Ethernet electrical interface sub card
Single 1000M Ethernet optical interface sub card, 20km
3
Color Status
Green ON
Flickering
OFF
Green ON
1
10M LNK/ACT
100M 1000M
2
Definition
The corresponding port is in Link Up status.
The corresponding port is transmitting or
receiving data.
The corresponding port is in Link Down
status.
The corresponding port is connecting to the
User Manual
3
7