Chapter 3 Device Appearance; Device Front Panel Description - Raisecom ISCOM2109F Hardware Installation User Manual

www.raisecom.com

3.1 Device front panel description

8 100BASE-FX Ethernet interfaces, 1 expansion socket for sub cards, 1 CONSOLE interface and
dozens of status indicators are placed on the front panel of ISCOM2109F switch (see the figure
below).
In the figure shown above:
① The logo and model of the switch are RAISECOM and ISCOM2109F respectively.
② 2 device status indicators: SYS and PWR.
Indicator
SYS
PWR
③ 8 100BASE-FX Ethernet interfaces and their corresponding status indicators. There are 2
Indicator
LNK
ACT

Chapter 3 Device Appearance

ISCOM2109F
9
CONSOLE
SYS
PWR
Color
Green
Green
indicators for an interface: LNK and ACT.
Color
Green
Green
1 2
TX RX TX RX
1 2 3 4 5 6 7 8
LNK
ACT
Status Description
ON The system is initializing after electrifying.
Flickering The system is operating in order.
Other Status Software fault.
ON The system is electrified.
OFF The system is not electrified.
Status Description
ON The corresponding port is in Link Up status.
OFF The corresponding port is in Link Down status.
ON No data forwarding at the corresponding port.
OFF There are data forwarding at the corresponding
port.
OFF The corresponding port is working in half duplex
mode or it is in Power OFF status.
3 4 5 6
TX RX TX RX TX RX TX RX
User Manual
7 8
TX RX TX RX
5