Installing A System Fan Module - Seagate Exos E 4U106 Hardware Installation And Maintenance Manual

Figure 62 Removing a system fan (1 of 2)
2. Grasp the fan module handle and carefully pull the fan out of its slot. See also the detail in
Figure 63 Removing a system fan (2 of 2)

Installing a system fan module

Refer to Figure 62
the module into the slot rather than remove it.
IMPORTANT: Handle the system fan carefully, and avoid damaging connectors.
1. Check for damage, especially to all module connectors.
2. Align the system fan module for insertion into its slot, as shown in
3. Insert the system fan, and slide the module into the enclosure, taking care to support the base and weight of the
module with both hands.
Gently, but firmly, push the fan module into its fully seated position with its mating connector in the enclosure.
78 Module removal and replacement
and Figure 63 when performing this procedure, but ignore the directional arrow. You will insert
Figure
Figure 63 (page 78).
63.