Seagate Exos E 4U106 Hardware Installation And Maintenance Manual page 55

8. Secure the 4U chassis ears to the rack/rail kit with embedded thumbscrews (quantity-2, 1 per side). For
shipping and transport, secure the 10-32 panhead screws provided (P/N: 01-00000264-00-01), and torque to
3.96 N-m (35 lbf-in) (quantity-4, 2 per side).
Thumbscrew
10-32 panhead screws for
shipping/transport only
Figure 46 Attaching panhead screws to the rack
9. Using the quantity-2 panhead screws provided (P/N: 727666900), attach the CMA "A" chassis attachment
bracket (P/N: 727666600) to the chassis above the CMA shelf, on its inner surface Torque screws to 1.36 N-m
(12 lbf-in). The images below show the progression of steps from left to right.
CMA "A' bracket
Figure 47 Attaching CMA bracket to the chassis
10. Clip the CMA "D" bracket onto the CMA "B" bracket (as shown in
The blue spring clips onto the C-shaped CMA attachment bracket present on the CMA "B" bracket

securely.
On the CMA "D" bracket, the arrow next to the "D" point upward.

panhead screws CMA "A" bracket installed on the
enclosure
step 7 on page 51). Ensure that:
Rackmount rail kit 55