C Enclosure Packaging - Seagate Exos E 4U106 Hardware Installation And Maintenance Manual

C Enclosure packaging
Supported packaging configurations are included for reference. Identify your packaging configuration from the
palletized enclosure ship kit assemblies shown below. Read the documentation provided in your ship kit before
unpacking, disposing of, or storing packing materials. See also "Unpacking the enclosure" (page 37).
Figure 75 4U106 enclosure packed in 3-piece box
Figure 77 (page 96) shows an illustrated parts catalog (IPC) representation of the enclosure master container to
complement the assembly view shown above.
Figure 76 RSC box
The Regular Slotted Container (RSC) box option is shown directly above. Figure 78 (page 97) shows an illustrated
parts catalog representation of the RSC enclosure master container. This box uses a split flap-style, as opposed to
the removable cover shown in Figure 75 (page 95). The RSC configuration differs from the 3-piece configuration:
it does not include the rail kit box, CMA box, or accessory box. These items are provided separately for this
configuration.
IMPORTANT: DISC drives in carriers (DDICs) are packaged separately from the 4U106 enclosure, and are
available in different assortments (single, 12-pack, 24-pack). Do not populate DISC slots with DDICs until after
the enclosure has been installed in the rack using a suitable mechanical lift. See also the CAUTION on page 12
and "Populating drive slots" (page 23).
95