Enclosure front panel
This enclosure front panel view intentionally omits the optional lift handles that attach to the enclosure sides and
that must be removed before pushing the enclosure mounted on the rails into the rack. It also does not show the
rails holding the enclosure when mounted in a rack because the rails are behind the pull handles.
Figure 3 4U106 enclosure system – front panel components
The enclosure front panel has seven system LEDs located in the lower left corner. See also
two enclosure pull handles used to slide the enclosure forward on its rails for in-rack servicing tasks are on the
right- and left-hand sides of the front panel.
Enclosure rear panel
This enclosure rear panel view intentionally omits the optional lift handles that attach to the enclosure sides and
that must be removed before pushing the enclosure mounted on the rails into the rack. It also does not show the
rails holding the enclosure when mounted in a rack because the rails are behind the pull handles.
1
18
System overview
2
3
Figure 3 (page
4
25). The
5
6