Attaching The Inner Rack Rails To The Physical Enclosure - Seagate Exos E 4U106 Hardware Installation And Maintenance Manual

Figure 30 shows the separated inner rail from its rail kit.
Figure 30 Separated an inner rail from the rail kit
6. Follow step 1

Attaching the inner rack rails to the physical enclosure

Correctly attaching the left and right inner rack rail subassemblies to the physical enclosure allows for proper
seating of the inner rack rails within the middle rack rails. This ensures that the enclosure will slide smoothly into
and out of the rack.
Before attaching the inner rails to the physical enclosure, make sure you have separated the inner rails from its rail
kits as described in
Attaching the left inner rail to the physical enclosure
1. Locate inner and outer edge on rail (P/N: 727648700) as in
Inner edge
Outer edge
Figure 31 Right and left inner rails
2. While facing the left side of the physical enclosure, align the left inner rail key holes (see
T-pins present on the left sidewall of the enclosure (see
through step 5 to remove the other inner rail from its rail kit.
"Removing the inner rails from the rail kits" (page
Left inner rail
Screw
Key
Rail Kit
Separated inner rail
Figure
Outer edge
Inner edge
Figure 32).
45).
31.
Right inner rail
Figure
Rackmount rail kit
31) to the 12
47