Installing The Rack Rails Into The Rack - Seagate Exos E 4U106 Hardware Installation And Maintenance Manual

7. Using the quantity-4 panhead screws (P/N: 727666900) provided with the CMA kit, attach the CMA B bracket
(P/N: 735166500) to the rear end of the outer slide. The images below show the progression of steps from left
to right. Torque each screw to 2.0 N-m (18 in-lbf).
CMA B bracket
panhead screws
Figure 38 Attaching CMA "B" bracket to the right rail

Installing the rack rails into the rack

1. Insert the right rail subassembly into the rack. Attach the adjustable rear mounting bracket to the rail first,
ensuring that the rail subassembly occupies the lower 2U portion of the allotted 4U space. The rear mounting
bracket spring will clip onto the rail. Ensure that the quantity-2 all-in-one rail kit mounting hardware fully seats
into the rack post mounting hole.
Location detail
Figure 39 Installing rack rail into the rack
CMA "B" bracket (inner side)
panhead screws
Fastener detail Attachment spring detail
Rackmount rail kit 51