Required Tools - Seagate Exos E 4U106 Hardware Installation And Maintenance Manual

Optional lift
handle
(2 per side)
Figure 24 Unpacking the 4U106 using lift handles
CAUTION: With four persons—positioned one at each corner of the enclosure—grip the handles
securely, and lift the enclosure out of the box using appropriate lifting technique. Place the enclosure in a
ESD-protected area.
Except for the drive modules, enclosures are supplied with all integrated PCBAs and all plug-in modules
installed. For information about plug-in module replacement, see
(page
6. Prepare to install and set up the enclosure.
a. Before installing the enclosure into a rack, see the CAUTION on
b. For rackmount installation, do not install the drive modules until after the enclosure is mounted in the rack.

Required tools

#2 Phillips screw driver
#10 Torx Driver
42 Installation
73). Drive modules are installed separately after the enclosure is mounted in the rack.
Push-pull pin
"Module removal and replacement"
page 12 and the WARNING on page 44.