Seagate Exos E 4U106 Hardware Installation And Maintenance Manual page 76

7. Grasp the PSU handle latch between the thumb and forefinger and press the latch tab down to unlock the
handle. Revolve the handle out and downward to lever the PSU out of the enclosure as shown in
Figure 60 Removing a PSU (1 of 2)
8. Grip the handle and withdraw the PSU, taking care to support the base of the module with both hands as you
remove it from the enclosure as shown in
Figure 61 Removing a PSU (2 of 2)
NOTE: The remove PSU illustrations show a module with a single power connection. The procedure
applies equally to single cord and dual cord PSU modules used in 4U enclosures.
9. If replacing two PSUs, repeat steps 5 through 8, being mindful of the illustrations TIP on
76 Module removal and replacement
Figure 61.
Figure 60.
page 74.