Seagate Exos E 4U106 Hardware Installation And Maintenance Manual page 32

NOTE: Pictorial views of the supported DDIC with SFF drive and adapter are provided below. Modules are
shown oriented for insertion into drive slots located on the enclosure top panel.
2
1
LED Description
1 Not used
2 Fault or
Identify
Figure 17 LEDs: Dual path SFF 2.5" drive carrier modules – top panel
If you need to replace this module, see FRU Replacement Time Limit
information about SFF drive LED behavior, see
32 System overview
Top view of SFF drive module
Definition
Not applicable.
Off – the Disc Drive in Carrier is operating normally.
Amber – A fault has been detected or a service action is required.
Amber 1s on / 1s off – application requested identification.
Amber - 3s on / 1s off - see log for fault conditions.
(Table
"LEDs" (page 66).
DDIC aligned to module slot
12) for more details. For additional