Product Data - Gent System 800 Installer Manual

Product data

Standards
Number of Zone
Devices on loop
Battery supply
Standby period
Repeat panel output
Common fault output
Common fire output
24V supply out
Sounder circuits and load
Sounder End of line resistor
Auxiliary output
External power supply input
and monitoring
Panel Enclosure
Colour
Dimension
Approval
Approximate Weight
(without batteries)
IP rating
Operating temperature
Storage temperature
Terminal size
Cable entry points
Mains supply
Factory set access codes
System 800 fire alarm panel
EN54 Part 2 & Part 4
24 zones per panel
24 hour standby + 0.5 hour alarm
To output to repeat indicator units
(up to 2 maximum per system)
Voltage free change over contacts rated 2A @ 30V
Voltage free change over contacts rated 2A @ 30V
2 sounder circuits per panel 0.45A each
protected by auto reset thermal fuse
10K ohms resistor
Voltage free change over contacts rated 2A @ 30V
24V with mains and battery fail output
Light blue-grey - Pantone 538
Height 375mm x Width 355mm x Depth 115mm
Applied for LPCB approval
All terminals can accept a cable with a maximum of 2.5mm²
cross section area
230V AC 50Hz (+10% -15%)
Access level 2 – 2222 (timeout 3 minutes)
Access level 3 – 3333 (timeout 3 minutes)
Access level 4 – 4444 (timeout 4 hours)
127 maximum
2 x 12V 7Ah
24V output
ABS
3.1Kg
IP 31
0ºC to 50ºC
-20ºC to 60ºC
Top and back
796688 (4188-657)_i2 _06/03
69