To Power Up The Loop Circuit; (Assuming The Loop Is Powered Down) - Gent System 800 Installer Manual

To power up the loop circuit

(assuming the loop is powered down)

A3
If the loop m ap has changed, only then
the loop de tection process m ust be started
m a nually, see To start detection process.
32
796688 (4188-657)_i2 _06/03
T his num ber w ill increm e nt as devices are
allocate d. The allocation process can
take several m inutes
'Allocated'
'R unning' - if no changes to the loo p m ap
- if loop m ap has changed