Light Indications - Gent System 800 Installer Manual

Light indications

Indication
Pre Alarm
Power
System fault
Power fault
FRE Disablement
FRE fault
Fire Protection Activated
Fire Routing Activated
Sounder fault
62
796688 (4188-657)_i2 _06/03
Light
colour Status of light and meaning
Fire STEADY – There is one or more fire(s) in the
system.
(Red)
OFF – There are no fire(s) in the system.
Fault STEADY – There is at least one fault in the system,
view the fault log for details.
OFF – There are no faults.
(Yellow)
STEADY – There is at least one coincidence zone /
device in the pre alarm state.
(Red)
OFF – There are no zones/device in coincidence fire.
STEADY – The mains & battery are healthy
OFF – The panel has no mains supply or battery
(Green)
supply.
STEADY – There is a system fault (MCU failure and
non-volatile memory corruption).
OFF – There is no system fault.
(Yellow)
STEADY – There is either a mains or battery supply
fault.
(Yellow)
OFF – There is no power fault.
STEADY – The fire routing equipment (FRE) is
disabled.
OFF – The FRE is not disabled.
(Yellow)
STEADY – There is a fault with fire routing
equipment.
OFF –There is no fault with fire routing equipment.
(Yellow)
STEADY – The fire protection output has been
activated and there is an automatic fire call out.
OFF – The fire protection output is not active.
(Red)
STEADY – The fire routing output is active.
OFF –The fire routing is not active.
(Red)
STEADY – There is a sounder circuit open or short
circuit fault.
OFF – There is no sounder circuit fault.
(Yellow)