Kostal PIKO Series Operating Manual page 97

System monitoring
1 2 3
Variant 1: Connect the inverter
and computer directly
This variant is mainly applied for the configuration of the
inverter by way of the web server on location.
Fig. 56: Connect inverter and computer directly
Inverter
1
Ethernet cable
2
Computer (for configuration or data retrieval)
3
Variant 2: Connect inverter and
computer by way of a switch/hub
Fig. 57: Connect inverter and computer by way of a switch/hub
Inverter
1
Ethernet cable
2
Switch/hub
3
Computer (for configuration or data retrieval)
4
03 / 2015 | DOC01361707 | KOSTAL operating manual PIKO inverter 3.0 - 20
4 5 6 7 8 9 10 11
IMPORTANT
INFORMATION
Use a patch cable of category 6
(Cat6e) with a maximum length of
100 m.
12
97