Kostal PIKO Series Operating Manual page 73

Operation and operating the device
1 2 3
The parallel connection menu item is only visible for inverters with at
1
least 2 DC inputs.
The inverter carries out a restart when the position (mode) of the
2
current sensor is changed in the menu.
Event messages can be faults or other events. The "Immediate
3
transmission" option sends the event message immediately following
the data capture period to a selected Internet portal. When a data flat
rate is not available, the data transfer with a GSM modem can result
in higher costs.
SW/HW version, FW: Firmware version, HW: Hardware version,
4
UI: Software version of the communication board, PAR: Version of the
parameter file.
Following entry of a code, additional menu items for configuring the
5
inverter appear. The code can be requested for installers from the
Service team.
Only visible once the service code has been entered.
6
03 / 2015 | DOC01361707 | KOSTAL operating manual PIKO inverter 3.0 - 20
4 5 6 7 8 9 10 11 12
73