Kostal PIKO Series Operating Manual page 35

Device and system description
1 2 3
The communication board
Fig. 22: Components of the communication board
Terminal S0/AL-Out (2-pin)
1
Display
2
2 Ethernet connections (RJ45)
3
Terminal analogue interface (10-pin)
4
Terminal expansion module
5
(e.g. GSM modem)
The communication board is the communications centre
of the inverter. The connections for communication, the
display and the control buttons are found on the com-
munication board.
03 / 2015 | DOC01361707 | KOSTAL operating manual PIKO inverter 3.0 - 20
4 5 6 7 8 9 10 11 12
35