Local Basic Operation; Getting Started - CP Plus Orange User Manual

1. Local Basic Operation

⚫
Slight difference may be found on the user interface. The following figures for reference only.

1.12 Getting Started

⚫
This chapter introduces device initial settings such as boot up, device initialization, reset password, and quick
settings.
1.1.1 Boot up
⚫
For device security, connect the NVR to the power adapter first and then connect the device to the power
socket.
⚫
The rated input voltage matches the device power button. Make sure the power wire connection is OK. Then
click the power button.
⚫
Always use the stable current, if necessary, UPS is a best alternative measure. Step 1 Connect the device to the
monitor and then connect a mouse.
⚫
Step 2 Connect power cable.
⚫
Step 3 Click the power button at the front or rear panel and then boot up the device. After device booted up,
the system is in multiple-channel display mode by default.
Device Initialization
1.1.2
⚫
If it is your first time to use the device, set a login password of admin (system default user). You can select to
use unlock pattern to login or not at your own choosing.
⚫
For your device safety, keep your login password of admin well after the initialization steps, and change the
password regularly.
⚫
Step 1 Boot up NVR.
The Device Initialization interface is displayed. See Figure 1-1.