CP Plus Orange User Manual page 12

⚫
Step 2 Check the box to enable reset function.
⚫
This function is enabled by default. Step 3 Click Apply to set settings.
⚫
If the password reset function is disabled, you can follow the ways listed below to reset
⚫
password.
Device supports Reset button on the main board: You can answer the security question on the local
⚫
menu or click the Reset button on the main board to reset password. Refer to "1.1.3.3 Reset Button " for
detailed information.
Device does not support Reset button on the main board: You can only answer the security question on the
⚫
local menu to reset password. (Make sure you have set security questions).
1.1.3.2 Resetting Password on Local Interface
Step 1 Enter the SYSTEM LOGIN interface.
⚫ If you have configured unlock pattern, the unlock pattern login interface is displayed.
⚫
See Figure 1-6. Click Forgot Pattern, the password login interface is displayed. See Figure 1-7.
If you did not configure unlock pattern, the System Login interface is displayed.
⚫
⚫
See Figure 1-7.
⚫
To login from another user account, on the unlock pattern login interface, click Switch User, or on the
password login interface, in the Switch User list, select other user to login.
⚫
Figure 1-6