Setting Period - CP Plus Orange User Manual

1.12 Setting Period

⚫
The system only activates the alarm in the defined period. Step 1 Next to Period, click Setting.
⚫
The Setting interface is displayed. See Figure 1-169.
⚫
Figure 1-169
⚫
Step 2 Define the motion detection period. By default, it is active all the time.
Define the period by drawing.
⚫
⚫
 Define for a specified day of a week: On the timeline, click the half-hour blocks to select the active
period.
⚫
 Define for several days of a week: Click
⚫
switches to
all the days with
⚫
 Define for all days of a week: Click All, all
⚫
timeline of any day clicks the half-hour blocks to select the active periods, all the days will take the same
settings.
Define the period by editing. Take Sunday as an example.
⚫
1) Click .
. On the timeline of any selected day, click the half-hour blocks to select the active periods,
will take the same settings.
before each day, the icon
switches to . On the