Explanation Of Symbols - Kontron ThinkIO-P Quick Start Manual

ThinkIO - P
™

Explanation of Symbols

CE Conformity
This symbol indicates that the product described in this manual is in
compliance with all applied CE standards. Please refer also to the
section "Applied Standards" in the ThinkIO-P Hardware Reference
Guide.
Caution, Electric Shock!
This symbol and title warn of hazards due to electrical shocks (> 60V)
when touching products or parts of them. Failure to observe the pre-
cautions indicated and/or prescribed by the law may endanger your
life/health and/or result in damage to your material.
Please refer also to the section "High Voltage Safety Instructions" on
the following page.
Warning, ESD Sensitive Device!
This symbol and title inform that electronic boards and their compo-
nents are sensitive to static electricity. Therefore, care must be taken
during all handling operations and inspections of this product, in
order to ensure product integrity at all times.
Please read also the section "Special Handling and Unpacking
Instructions" on the following page.
Warning!
This symbol and title emphasize points which, if not fully understood
and taken into consideration by the reader, may endanger your health
and/or result in damage to your material.
Note ...
This symbol and title emphasize aspects the reader should read
through carefully for his or her own advantage.
ID 29867.01, Rev. 01
QUICK START GUIDE
© 2005 Kontron Modular Computers GmbH
Preface
Page v