ParaBody 350 Assembly Instructions Manual page 25

A. Slide the top boom ® over the ends of both guide rods ® and loosely assemble'it to the front upright~
using two 1/2 x 4" bolts@, two 1/2" flat washers@, and two 1/2" nylock nuts@ as shovcn.
Loosely assemble the.bearing housing@ to the rear upright @ and the top boom® using two I/2 x 3"
bolts~ as shown. (NOTE: Install these bolts carefully to avoid stripping the internal threads of the .top
boom and bearing housing.)
C. At this time, securely tighten all frame connections in this order: bearing housing@ to rear upright~
and top boom ®, rear upright ~) to bas~@, top boom ® to front upright@, and front upright @ to base@.
Frame Assembl~ - S~ep 3