ParaBody 350 Assembly Instructions Manual page 27

Step 5
13.
C.
D.
Securely assemble one spring pin assembly® to the front upright@
Apply eight 1-1/2 x 3/4" glides@ to the front upright@ as shown.
as shown.
Repeat steps 5A and 5B for the rear upright@.
Securely assemble the pec seat pad @ to the pec seat @ using two 3/8 x 2-3/4" bolts 03 and two 3/8"
flat washers@ as shown.
E. Insert the pec seat assembly into the rear upright@ as shown. The pec seat height can be adiusted
using the spring pin@ and can be secured with the three prong knob@.
R Securely assemble one back pad @ to the rear upright@) using two 3/8 x 2-3/4" bolts(D and two 3/8"
flat washers @ as shown.
G. Securely assemble the press seat pad@ to the press seat@ using two 318 x 2-3/4" bolts@ and two 3/8"
flat washers@ as shown.
H. Insert the press seat assembly into the front upright@) as shown. The press seat height'can be adjusted
using the spHng pin@ and can be secured with the three prong knob @,
!. Securely assemble one back pad @ to the front upright @ using two. 3/8 × 3-3/4" bolts,D and two 3/8"
flat washers @ as shown.
Frame Assembly - Step 5
Pa~t #6603701
II
Revision: 1.1/25/97