ParaBody 350 Assembly Instructions Manual page 32

Pec I~e© Cab|e Assemb~ ins~c~ons
Step 1
Use this procedure to assemt~le the oec dec cable of the ParaBody 350 Home Gym.
Connect one end of the pec dec cable @ to the slotted bushing on the right pec arm~) as shown. Route
the .other end of the pec dec cable around ;~he rear ~pright® and connect it to the slotted bushing on
the left pec ~rm ®.
Securely assemble the pec dec cable @ and two 4-1/2"-pulleys.@ to the top boom ® usin 8 two 3/8 ×
1-3/4" bolts~, two 'L' brackets@, ahd two 3/8" nylock nuts @ as shown. (Note: The pec dec cable
should be routed underneath the short leg of the 'L' bracket. Also, the 'L' brackets should be positioned
at a 45 desree angle to function properly.)
Pec l~ec Cable Assembly - St~p 1
13
Revision: 11/25/97