Table of Contents
Advertisement
Step 5
A. Securely assemble one spring pin assembly® to the front upright~ as shown.
B. Apply eight 1-1/2 x 3/4" glides@ to the front upright® ag shown.
:
C. Repeat steps 5A and 5B for the rear upright®.
D. Securely assemble the pec seat pad @ to the pec seat @ using two 3/8 x 2-3/4" bolts (9 and two 3/8"
flat washers@ as shown.
E. Insert the' p~c seat asserflbly into the rear upright® as shown. The pec seat height can be adjusted
using the spring pin @ and can be secured with the three prong knob@.
F. Securely assemble one back pad @ to the rear upright® using two 3/8 x 2-3/4" bolts~D and two 3/8"
flat washers @ as shown.
G. Securely assemble the press seat pad@ to the press seat@ using two 3/8 x 2-3/4" bolts~ and two 378"
flat washers@ as shown.
H. Insert the press seat assembly into the front upright® as shown. The press seat heightcan be adjusted
using the sp~ing pin@ and can be secured with the three prong knob@.
I.
Securely assemble one back pad ~ to the front upright ® using two. 3/8 × 3-3/4" bolts @ and two 3/8"
fiat washers @ as sho~vn.
¯ - :11
Frame Assembly -Step 5
Part #6603701
8
Revis]on: 1-1/2-5/97
Hide quick links:
Advertisement
Table of Contents
