Transport, Storage, Assembly And Installation; Transport; Storage; Assembly - ProMinent Dulco flex DFBa Series Operating Instructions Manual

4

Transport, storage, assembly and Installation

4.1

Transport

4.2

Storage

4.3

Assembly

Transport, storage, assembly and Installation
User qualification, transport and storage: instructed persons,
n
Ä Chapter 1.2 "Users' qualifications" on page 5
see
User qualification, assembly: trained qualified personnel, see
n
Ä Chapter 1.2 "Users' qualifications" on page 5
User qualification, electrical installation: Qualified electrician,
n
Ä Chapter 1.2 "Users' qualifications" on page 5
see
WARNING!
Safety data sheet
Possible consequence: Fatal or very serious injuries
Always observe the corresponding data sheets for the
media when carrying out any tasks which involve
contact with the media that is to be conveyed.
Transport
The pump is protected by means of cardboard packaging
n
The packaging materials can be recycled
n
For environmental conditions for storage and transportation
n
Ä Chapter 4.3.1 "Ambient conditions" on page 22
see
Storage
The pump hose should be removed from the housing during
n
the duration of storage
For storage durations longer than 60 days, the coupling
n
surfaces (terminals, reducing adaptors, motors) are to be
protected with suitable antioxidant agents
For environmental conditions for storage and transportation
n
Ä Chapter 4.3.1 "Ambient conditions" on page 22
see
CAUTION!
Possible consequence: Slight or minor injuries, mate‐
rial damage.
Carry out the assembly work before the electrical
installation is undertaken!
Observe the permissible environmental conditions!
21