Introduction
Training
Electrician
Customer Service department
1.3
ID Code
Device identification / Identcode
1.3.1
Identcode DULCO
DFBa DULCO
flex DFBa 010
®
Type
010
DFBa 010, 0.024 l/revolution
Drive
000
Pump without drive
Step-down gears / 3 x 230 / 400 VAC
A10
0.12 kW, 15 1/min, 21 l/h, 8 bar
A11
0.12 kW, 20 1/min, 28 l/h, 8 bar
A12
0.18 kW, 29 1/min, 41 l/h, 8 bar
A13
0.18 kW, 46 1/min, 66 l/h, 4 bar
A14
0.25 kW, 57 1/min, 82 l/h, 4 bar
A15
0.25 kW, 70 1/min, 100 l/h, 2 bar
A16
0.25 kW, 85 1/min, 122 l/h, 2 bar
Manual adjustment gears / 3 x 230 / 400 VAC
A21
0.15 kW, 3-16 1/min, 4-23 l/h, 8 bar
A22
0.25 kW, 5-29 1/min, 7-41 l/h, 8 bar
A23
0.25 kW, 10-53 1/min, 14-76 l/h, 4 bar
A24
0.25 kW, 15-80 1/min, 21-115 l/h, 2 bar
6
Definition
Electricians are deemed to be people, who are able to complete work
on electrical systems and recognize and avoid possible hazards inde‐
pendently based on his/her technical training and experience, as well
as knowledge of pertinent standards and regulations.
Electricians should be specifically trained for the working environment
in which the are employed and know the relevant standards and regu‐
lations.
Electricians must comply with the provisions of the applicable statutory
directives on accident prevention.
Customer Service department refers to service technicians, who have
received proven training and have been authorised by ProMinent to
work on the system.
Note for the system operator
The pertinent accident prevention regulations, as well
as all other generally acknowledged safety regulations,
must be adhered to!
®
flex DFBa 010
Identcode