Operating And Display Elements - Pepperl+Fuchs HiC2081 Manual

Temperature Converter HiC2081, HiD2081, HiD2082
Installation and mounting
5.3

Operating and display elements

The following operating and display elements are located on the front
side of the device:
• Red LED CH1 FAULT (channel I) to display
 a lead fault on input 1
(terminals 1, 2, 4, 5, flashing red)
 of the simulation mode (flashing red)
 a device failure (continuously red)
• Red LED CH2 FAULT (channel II only HiD2082) to display
 a lead fault on input 2
(terminals 3, 6, 7, 8, flashing red)
 of the simulation mode (flashing red)
 a device failure (continuously red)
• green LED PWR ON, to indicate the presence of the supply voltage
• serial RS 232 interface for connection to a PC for programming and
diagnosis of the device using PACTware
16 - EN
TM
PWR
CH 2 CH 1
FAULT FAULT
HiD
2082
Serial
Config.