Configuration Using A Pc Operating Program - Pepperl+Fuchs HiC2081 Manual

Temperature Converter HiC2081, HiD2081, HiD2082
Operation
6.2

Configuration using a PC operating program

6.2.1 Installing the software components
In order to be able to configure the device by means of a PC operating program, the following software
components are required:
1. Microsoft .NET Framework 1.1 or later
®
2. PACTware 2.4 (Process Automation Configuration Tool) or later.
TM
PACTware is used according to FDT Specification 1.2 (Field Device Tool Specification) as a
TM
framework program for the DTM (Device Type Manager), which is supplied by manufacturers of field
devices as configuration software.
3. DTM Collection Conventional Interface Technology. The DTM Collection comprises all device and
communication DTM required to parameterise devices of conventional interface technique.
The DTM are used to establish the communication with field devices using protocols, such as the
HART or PROFIBUS protocol.
The software components are rendered available on CD or on the Internet at www.pepperl-fuchs.com
in the product selector under Software > PACTware.
For the latest software component, please access the product selector for
Software > PACTware.
Installing the software components:
The installation of the software components is described in the "PACTware
Instructions" manual. Please observe the sequence of the installation steps and the
instructions in the installation instructions.
• Install Microsoft
• Install PACTware
• Use the DTM Collection Conventional Interface Technology to install the
communication DTM of your device.
.NET Framework.
®
.
TM
Installation
TM
EN - 19