Intended Use - Pepperl+Fuchs HiC2081 Manual

Temperature Converter HiC2081, HiD2081, HiD2082

Intended use

2 Intended use
The outputs can be selected as a current source, current sink, or voltage source via DIP switches.
The devices can also be configured as a signal splitter (only HiD2082).
Line fault detection of the field circuit is indicated by a red LED and an output on the fault bus. The fault
conditions are monitored via a Fault Indication Board.
The devices are easily configured by the use of the PACTware
This devices mount on HiC or HiD Termination Boards.
For more information (on certificates, data sheets and the instruction manual), please refer to our
website at www.pepperl-fuchs.com (entry in product search: HiC2081, HiD2081 or HiD2082).
The temperature converters HiC2081,
HiD2081 and HiD2082 are used for intrinsic
safety applications. The devices HiC2081
and HiD2081 are 1-channel devices; the
device HiD2082 is a 2-channel device.
The devices accept thermocouples (TC),
millivolts, potentiometers, or resistance
temperature detectors (RTD) from a
hazardous area and convert them to an
isolated, linearized analog output in the safe
area.
mV
Ω
configuration software.
TM
mV
Ω
EN - 7