Basic Operating Modes - Pepperl+Fuchs IVI-KHA6-4HRX Manual

4

Basic operating modes

This control interface unit can be configured to operate either as a fixed code control
interface unit or as a read/write control interface unit. The operating mode is selected
by means of DIP switches S4, S5 and S6, located on the top of the unit.
Basic operation mode
Fixed Code
Read/write
3964R with RK512 Interpreter
3964R without RK512 Interpreter
When configured in fixed-code mode, this interface unit is software compatible with
the IRI-KHA6-4HRX and IRI-KHD2-4HRX control interface unit units.
By some kind of switches, the description of the switch-setting "open" corresponds
with "OFF" or "0". The switch-setting "close" corresponds with "ON" or "1".
Switch settings which have not been defined should not be used.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
IDENT-I • IVI-KHA6-4HRX, IVI-KHD2-4HRX
S4
open
open
open
close
Basic operating modes
S5
open open
close close
close open
open open
Copyright Pepperl+Fuchs, Printed in Germany
S6
9