Passive System Parameters (Optional) - Tannoy V12HP User Manual

13.2 Passive System Parameters (optional)

With the vast array of digital loudspeaker management systems available it is inevitable that the user
may opt to use a controller other than the TX2 & TDX2 as part of a large scale integrated system. In
passive mode the V12HP has been designed to need no external equalisation to overcome system
limitations. If the V12HP is to be used alone with additional bass enhancement required and have
the frequency response limits tighter than +/- 3dB as stated in section 11, then apply the
parameters in the table below for optimised performance:-
Parameter
Gain
Delay
Polarity
HPF
LPF
PEQ 1
PEQ 2
PEQ 3
PEQ 4
PEQ 5
Note : When using the V12HP with subs, set HPF @ 80 – 110Hz
(24dB/oct LR) and omit PEQ1.
PEQ 1 may also be omitted when using the V12HP as a floor monitor.
Unit/Name
(dB) User definable
(ms) User definable
Positive
Freq (Hz) 42.5
Slope (dB/oct) 24
Filter Shape Butterworth
Freq (Hz) Thru
Slope (dB/oct) NA
Filter Shape NA
Freq (Hz) 62.5
Level (dB) +7
Type Parametric
Q / Bandwidth 2.5 / 0.3969
Freq (Hz) 680
Level (dB) -3.5
Type Parametric
Q / Bandwidth 1 / 1.000
Freq (Hz) 1410
Level (dB) -1
Type Parametric
Q / Bandwidth 4 / 0.2500
Freq (Hz) 7130
Level (dB) -2
Type Parametric
Q / Bandwidth 2 / 0.500
Freq (Hz) NA
Level (dB) NA
Type NA
Q / Bandwidth NA