Technical Specifications - Tannoy V12HP User Manual

11. Technical Specifications

Frequency Response (1) +/- 3dB
-10dB Point
Recommended Amplifier Power
Power Handling(2)
Passive Full Range
Biamp (LF)
Biamp (HF)
Sensitivity (1)
2.83 volt @ 1m Passive Full range
Biamp (LF)
Biamp (HF)
Maximum SPL (3)
@ 1m Passive Full Range
Biamp (LF)
Biamp (HF)
Impedance
DI Averaged (PCQ)
@ 1kHz (ISO)
@ 2kHz (ISO)
@ 4kHz (ISO)
@ 8kHz (ISO)
@ 16kHz (ISO)
Q Averaged (PCQ)
@ 1kHz (ISO)
@ 2kHz (ISO)
@ 4kHz (ISO)
@ 8kHz (ISO)
@ 16kHz (ISO)
Distortion
0.1 Full Power
250 Hz
1000 Hz
10000 Hz
0.01 Full Power
250 Hz
1000 Hz
10000 Hz
Driver Complement
Crossover Point
Enclosure
Finish
Protective Grille
Connectors
Fittings
Dimensions
Weight
NOTES: (1) Average over stated bandwidth. Measured at 1m on axis.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m in an anechoic chamber
All Tannoy V Series products can be used with the Tannoy TDX2 Digital Controller for optimum system performance and when
being used with various sub bass systems. Please visit our website at
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods
will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice.
Please verify the latest specifications when dealing with critical applications.
67Hz - 23kHz
55Hz - 25kHz (with Tx2/TDx2 controller)
57Hz (50Hz with Tx2/TDx2 controller)
(passive Full Range) 350 - 700 watt / 8 ohm
Average(2) Programme Peak (10ms)
350 watt
350 watt
60 watt
99dB (anechoic)
99dB (anechoic)
106dB (anechoic)
Average
124 dB
124 dB
124dB
Nominal
10.35, 500 Hz - 16 kHz
6.35
10.82
9.2
13
15.8
14.6, 500 Hz - 16 kHz
4.93
12.08
8.32
19.95
38
2nd Harmonic
0.32%
1.58%
5.62%
2nd Harmonic
0.11%
0.79%
1.94%
1 x 12" (300mm) PowerDual
Constant Directivity Dual Concentric Type number 3190
Passive 1.5kHz
2nd order high pass, 2
Product can be reconfigured for active / bi-amped operation
Active system parameters available in section 13 of manual
37.5 litre vented, Birch plywood
Textured black paint (optional in white)
Foam covered, powder coated perforated steel
2 x Speakon NL4MP IN/OUT
Configuration for biamp operation via the termination panel.
Recessed rear mounted carrying handle,
Blanking plate allows installation of a 35mm pole-mounting socket,
8 x M10 bracket inserts allowing for landscape or portrait orientations,
8 x M10 flying inserts.
486mm(H) x 370mm(W) x 375mm(D)
19.13"(H) x 14.57"(W) x 15.15"(D)
22 Kg (48.4 lbs)
www.tannoy.com
700 watt 1400 watt
700 watt 1400 watt
120 watt 240 watt
102dB (half space)
102dB (half space)
Peak
130 dB
130 dB
130dB
8.0 ohm (passive fullrange & each driver biamp)
3rd Harmonic
0.89%
3.54%
0.19%
3rd Harmonic
0.71%
2.53%
0.161%
nd
order low pass
for further details