Passive System Parameters (Iq 10P & Iq 10Pc) - Tannoy iQ 10 User Manual

Passive System Parameters (iQ 10P & iQ 10PC)
With the vast array of digital loudspeaker management systems available it is
inevitable that the user may opt to use a controller other than the TDX1 or TDX2 as
part of a large scale integrated system. Use the parameters in the table below for
optimised performance:-
Parameter
Gain
Delay *
Polarity
HPF
LPF
PEQ 1
Note Apply only when an iQ 10 is stacked directly on top of an iQ 18 Sub bass. Otherwise only apply
delay to compensate for distance between relevant sources.
20
Unit/Name
(dB) User definable
(ms) 3.58
Positive
Freq (Hz) 180
Slope (dB/oct) 24
Filter Shape Linkwitz Riley
Freq (Hz) Thru
Slope (dB/oct) NA
Filter Shape NA
Freq (Hz) 2000
Level (dB) -4
Type Parametric
Q / Bandwidth 0.8 / 1.25