System Connectivity - Tannoy QFLEX User Manual

11 SYSTEM CONNECTIVITY

NOTE, QFlex is a professional product intended for installation by properly qualified and certificated personnel.
Cable Management
All connections (AC, Network, and Signal) are accessed at the bottom of the QFlex column. This allows for neat,
unobtrusive cable management in your installation. The connectors will not be visible when installation is complete.
Connections are accessed by the removal of the lower rear access plate on a QFlex master which will require the
use of a Philips screwdriver.
With the plate removed the connector areas look like this
END VIEW
AUDIO A&B AUDIO A&B
IN
VNET
IN & LINK
TOP VIEW
A
A B
AUDIO IN
AUDIO LINK
IN LINK
SYSTEM
LINK
MAINS IN
B
MODE STATUS
CONTROL
DIGITAL
POWER
AUDIO
100-230v
50-60 Hz
IN LINK
1kW MAX