Installation Using Optional Variball Bracket - Tannoy AMS Series Operation Manual

7. Connect the euro plug to the loudspeaker. For outdoor installation, attach the cable entry cover using a
3 mm Allen key and the included screws. Orient the cover plate so that the neck opening is facing downward
to minimise entry of moisture or particulates.
8. Connect a secondary support line to the safety tab at the rear of the cabinet.

5.2. Installation using optional VariBall bracket

Please see AMS VariBall Accessory Backet - Mounting and Installation Guide for reference.
1. Fix the wall bracket to the wall surface using suitable fixing method for supporting the loudspeaker with
ample safety margins.
2. Fix the ball bracket to the rear of the loudspeaker using the supplied screws and a 3 mm Allen key. Two
screws are used for AMS 5 models; four screws are used for AMS 6 and AMS 8 models.
3. Set the transformer tap as detailed in Section 6 following.
4. For indoor installation (proceed to step 5 for outdoor installation): Connect the euro-style plug to the wires,
observing correct polarity. Use pins 1(+) and 2 (-) for connection of the loudspeaker. Use pins 3 (-) and 4 (+)
for connection of additional loudspeakers in a distributed line. Note: Tighten pins 3 and 4 even if not used to
prevent vibration of the screws.
5. For outdoor installation: Feed the loudspeaker wire(s) through the opening in the neck of the cable entry
cover included with the product.
AMS Series Operation Manual rev 1.1.0
5. Installation
7