Table of Contents
Advertisement
4. Installation Guide
4. Installation Guide
4.1. Back-can
The custom engineered powder coated steel back-can has been designed to cater for all conceivable
installation possibilities making the CMS 1201DC extremely versatile. Internally dampened with 11 mm (0.43")
OSB2 board, the addition of the back-can provides exceptional low frequency performance.
4.2. Mounted Using Unistrut roof rail system
Steel mounting lugs allow for fitting to a Unistrut roof rail system in a variety of configurations both directly or via
secondary prefixed cross struts.
Screw at fixing point should use a large series washer to help spread the load.
Speaker mounted to a single rail
Back-can mounted between rails
6
CMS 3.0 Series Operation Manual rev 3.0.0
Advertisement
Table of Contents
