Symbols On The Product; Symbols On The Display - Husqvarna AUTOMOWER 420 Operator's Manual

29. Couplers for the loop wire
30. Loop wire for boundary loop and guide wire
3
31. Stakes
32. Connectors for the loop wire

2.3 Symbols on the product

These symbols can be found on the product. Study them
carefully.
This product complies with the applicable
EU Directives.
This product complies with the applicable
UK Directives.
1
Is a part of the Installation kit which is purchased separately.
2
Is a part of the Installation kit which is purchased separately.
3
Is a part of the Installation kit which is purchased separately.
4
Is a part of the Installation kit which is purchased separately.
8 - Introduction
1
2
4
WARNING: Read the user
instructions before operating
the product.
WARNING: Disable the prod-
uct before working on or lift-
ing the product.
WARNING: Keep a safe dis-
tance from the product when
operating. Keep your hands
and feet away from the rotat-
ing blades.
WARNING: Do not ride on
the product. Do not put your
hands or feet close to or un-
der the product.
Do not use a high-pressure
washer or even running water
to clean the product.
Use a detachable power sup-
ply as defined on the rating
label next to the symbol.
It is not permitted to dispose this product
as normal household waste. Ensure that
the product is recycled in accordance with
local legal requirements.
The chassis contains components which
are sensitive to electrostatic discharge
(ESD). The chassis must also be resealed
in a professional manner. For these
reasons the chassis shall only be opened
by authorized service technicians. A
broken seal can result in the entire or
parts of the guarantee no longer being
valid.
The low-voltage cable must not be
shortened, extended or spliced.
Do not use a trimmer nearby the low-
voltage cable. Be careful when trimming
edges where the cables are placed.

2.4 Symbols on the display

In the schedule menu you can set when
the product will cut the lawn.
In the cutting height menu you can set the
cutting height of the product.
In the security menu you can select
between 3 security levels for the product.
In the messages menu you can find the
Fault messages and Info messages of the
product.
The Weather timer function automatically
adapts the cutting intervals to the grass
growth.
1201 - 007 - 20.02.2023