TLE493D-A2B6 MS2GO
3D Magnetic Sensor 2 Go evaluation kit
Software installation
3
Software installation
The following description guides through the installation procedure of the free evaluation software for the 3D
Magnetic Sensor 2 Go kit.
Steps
1.
Download the software.
Follow the link below to reach the Sensor 2 Go information page on the Infineon website. As shown in
Figure
15, you can find the download link for the latest version of the 3D Magnetic Sensor 2 Go GUI on
the right hand side.
https://www.infineon.com/cms/en/product/promopages/sensors-2go/
Figure 15
2.
Start the installation process.
Browse to your download folder and extract the downloaded .zip file. Afterwards, double click on
the .msi file to start the installer. The window in
User Manual
Download the "3D Magnetic Sensor 2 Go" software from the Infineon web
page
Figure 16
13
pops up. Click "Next".
1.2
2019-09-06